Checking for Schedule Issues using the INC

This guide assumes good familiarity with INC use, if this is not the case please refer to the full application note and/or the INC user guide.

A correctly working system has the IPC configuration file (podlist) and schedules loaded into the INC and schedules have been distributed. Assuming the time has been correctly sent to the IPCs, there is a quick and simple way to check an IPC has the correct schedule.

  1. Check Status Information
    Check the status for the IPC of interest. IPC List > select IPC > View > Status
  • Schedule – whether or not the schedule in the IPC matches that in the INC (Correct / Wrong)

The schedule details can be viewed if desired. IPC List > select IPC > View > Schedule

  • If a schedule for the IPC of interest is not loaded in the INC “Couldn’t Load!” is displayed.
  1. Display all Schedule Mismatches
    The filter can be used to display a list of all IPCs with schedule mismatches.
  • IPC List > Filter > select Schedule & Bad > Apply

The filter can be used similarly to display clock errors, charge levels and last communication state.

Related Documents
AN03 – Checking for Schedule Issues using the INC
INC User Guide